background image

IPEX6000TC-F Technical Specifications

Input/Output Connections

HDMI Input

One (1) HDMI Type A Receptacle

HDMI Output

One (1) HDMI Type A Receptacle

LAN

10GbE: SFP+

LAN: One (1) 8P8C port (Shielded RJ45)

Power

One (1) 5.5 mm OD, 2.1 mm ID Threaded Barrel

RS232 Port

One (1) 3-pin Removable Terminal Block Connector

USB Device / Client

Two (2) USB Type A Port

USB Host

One (1) USB Type B Port

Audio Input / Output

One (1) 3.5 mm TRS Receptacle

IR Input

One (1) 3.5 mm TRS Receptacle

IR Output

One (1) 3.5 mm TS Receptacle

Supported Audio, Video and Control

Video Input Resolutions

Resolutions up to 4K@60Hz, 4:4:4

Supports HDR Metadata, including DolbyVision, HDR10 and HLG

Video Output Resolutions

Resolutions up to 4K@60Hz, 4:4:4

Supports HDR Metadata, including DolbyVision, HDR10 and HLG

Video Compliance

HDMI 2.0 and HDCP 2.2

Embedded Audio

HDMI:

 LPCM, 2.0/5.1/7.1 channel, 44.1/48/96/192 kHz, Dolby True HD, up to 7.1,192kHz, DTS-

HD Master, up to 7.1,192kHz, Dolby Digital AC-3 (DVD format), DTS version 1 (DVD format)

Analog / 3.5mm:

 Unbalanced 2 channel stereo

Supported Baud Rates

300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

USB Compliance

USB 1.1 Full Speed up to 12Mbps

Video Wall Scale Capability

Up to 8x5

Streaming Signal Characteristics

Maximum Distance (point to point)

300m (984 ft) when using OM3 multimode fiber

Maximum Distance (matrix, multi-view, video wall)

300m (984 ft) when using OM3 multimode fiber

Cable Requirements

Multi-mode OM3 duplex LC-LC fiber optic cable

Encoding Data Rate

4K Signals: Up to 8Gbps

1080p Signals: Up to 4Gbps

End to End Latency

Zero Frame Latency

Chassis and Environmental

Dimensions (H x W x D)

25 mm x 215 mm x 140 mm (0.98in x 8.5 in x 5.5 in)

Weight

0.8kg / 2.2 lbs

Operating Temperature

0° to +45° C (+32° to +113° F)

Operating Humidity

10% to 90%, Non-condensing

Storage Temperature

-20° to +70° C (-4° to +140° F)

Storage Humidity

10% to 90%, Non-condensing

Power and Regulatory

Power Input

12V DC 2A or 48V DC PoE (Power over Ethernet)

Power Consumption

9.6 watts

ESD Protection

8kV air, 4kV contact

Regulatory

FCC, CE, RoHS

Other

Warranty

5 years

Included Accessories

Installation Guide, 10G Fiber Optic Transceiver, Power Supply with US, UK, EU and AU adapt

-

ers, 3-pin Removable Screw Terminal, Mounting Ears (2 ea), IR emitter, IR receiver

Compatible Transceiver

IPEX6000TC-F

Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable 

patches.

Summary of Contents for DIGITALINXIP SDVoE IPEX6000TC-F













Reviews: