LGMG AS0607E, Maintenance Manual

Page: 32 / 48

Maintenance Manual of Elevating Work Platform
27
from the hydraulic filter to the hydraulic
oil tank. Remove the pipeline from the oil
tank. Cover the pipe joint to keep away
the dust.
③
Make and disconnected the hydraulic
pump and the oil suction pipe of oil tank
and take out the oil pipe. Cover the pipe
joint to keep away the dust.
④
Release the hydraulic oil tank fastener
and take out the hydraulic oil tank.
⑤
Unscrew the hydraulic oil fueling cover
and pour the oil in a proper container.
△
! Warning: The ejected hydraulic oil
may inject the skin. Please slowly
unscrew the hydraulic joint to
gradually reduce the oil pressure. Do
not eject the oil.
①
Clean the overflowed hydraulic oil and
correctly use the discharge hydraulic oil.
②
Clean the hydraulic oil tank with mild
solvent and absolutely dry it with air.
1) Install the hydraulic oil tank and screw the
hydraulic oil tank fastener. The torque shall
follow the requirements below:
Torque specification
Lubrication-free
hydraulic oil tank
fastener
25±2N

m
2) Connect the oil inlet of hydraulic pump to
the oil tank.
3) Connect the oil return pipe of the oil return
filter to the hydraulic oil tank.
4) Fill the oil tank with hydraulic oil. Do not
overflow the oil and screw the tank filler
cap.
5) Start the oil pump to fill the entire hydraulic
system with hydraulic oil and eliminate the
air.
△
! Warning: Component damage
hazard
The operation without any fuel may
damage the hydraulic pump. Carefully
pump the oil tank when fueling the
hydraulic system. Take measures to
prevent the hydraulic pump from
erosion.