LGB 27632, Manual

Page: 10 / 37

10
SERVICE
Lubrication
Oil each of the axle bearings now and then with a drop of Märklin oil (7149).
Changing Light Bulbs (E130 023)
Lamps (front):
Pull the lamp housing from the model. Pull the light bulb plugged into
the socket from the latter. Insert the new light bulb. Re-assemble the model.
Lamps (rear): Carefully lift the lens out of the lantern housing. Then use a pair of
tweezers to pull the light bulb out of the bulb holder. Now insert a new light bulb.
Finally, put the lantern back together.
Interior Lighting: Pull the light bulb from the socket using a pair of tweezers. Insert
the new light bulb.
Replacing Traction Tires
• There are five screws under the mechanism. Loosen the first, second and fifth
screws.
• Carefully pull the mechanism out of the frame.
• If necessary, pull the current pickup wire off.
• Remove the hex head screws used to mount the drive and side rods to the center
driving wheels. Remove the side rods from the wheels.
• Use a small flat blade screwdriver to remove the old traction tire: Lift the old
traction tire from the groove in the driving wheel. Carefully push the new traction
tire over the wheel and into the groove. Make sure that the traction tire is properly
seated.
• Put the model back together.
Controllable Functions
Lighting
1
LV + LR
Sound effect: Horn long 1 Sound 1
Sound effect: Squealing brakes off 2 BS
Sound effect: Bell 3
Sound effect: Announcement 4 Sound 5
Sound effect: Horn short 5 Sound 4
Sound effect: Operating sounds
1,2
6 FS
Sound effect: Horn 4 x short 7
Sound on/off 8
ABV, off 9
Sound effect: Compressor 10 AUX 1+2
Sound effect: Blower 11 AUX 3
Sound effect: sanding 12 AUX 4
Sound effect: Announcement 13 Sound 9
Sound effect: Announcement 14 Sound 11
Sound effect: Fill brake line 15 Sound 14
Sound effect: Pea whistle 16 Sound 2
Sound effect: Letting off air 17 Sound 6
Sound effect: Rail joints 18 Sound 20
Sound effect: Coupling together 19 Sound 19
Sound effect: Announcement 20 Sound 17
Engineer‘s cab lighting 21 Sound 18
1 active in analog operation
2
with random sounds