LG VR6140LVM Owner'S Manual Download Page 27 | Manualshive

Page: 27 / 40

background image

25

CLEANING THE DUST BIN

1. Open the dust bin cover by pressing the PUSH

button on the HOM-BOT 2.0.

2. Grab the handle of the dust bin and pull it

upward.

3. Separate the HEPA filter and the inside sponge

filter by removing the HEPA filter

※

To clean the dust bin filter, refer to page 26.

4. Lift the cover upward while pressing the

separation button on the dust bin.

※

Please use vacuum cleaner when cleaning the

filter.

(Be sure to fully dry the filter after washing it. It

may can affect inhalation or can make smell.)

5. Empty the dust bin and clean it with a cleaning

brush or under running water.

6. After cleaning with water, completely dry the dust

bin in a well-ventilated area out of direct sunlight.

7. When you have completed cleaning the dust bin,

close the dust bin lid and replace the sponge

filter and HEPA filter.

8. Put the dust bin into the HOM-BOT 2.0 and

close the dust bin cover.

If the dust bin is full, suction power can be weakened. Clean the dust bin before and after each cleaning

session. Clean the dust bin using the following sequence:

• After cleaning, always mount the dust bin filters (HEPA filter, sponge filter) to the dust bin.

If they are not mounted, dust may enter the HOM-BOT 2.0 interior and cause product failure.

• After cleaning the dust bin, make sure to start the operation with the dust bin installed.

If operation is attempted without the dust bin, a voice message, “please check the dust bin”

will sound.

Tip

«
...
25
26
27
28
29
...
»

Summary of Contents for VR6140LVM









































Reviews:

No comments

Related manuals for VR6140LVM

Brand: Samsung Pages: 23

Brand: Samsung Pages: 8

Brand: Samsung Pages: 12

Brand: Daewoo Pages: 30

Brand: Samsung Pages: 220

Brand: Samsung Pages: 240

Brand: Samsung Pages: 48

Brand: Samsung Pages: 200

Brand: Samsung Pages: 80

POWERbot SR10M70 Series

Brand: Samsung Pages: 16

POWERbot SR1 M70 Series

Brand: Samsung Pages: 184

POWERbot SR20K9000U Series

Brand: Samsung Pages: 26

Brand: Samsung Pages: 64

Brand: Samsung Pages: 16

Brand: Samsung Pages: 16

Brand: Samsung Pages: 16

Brand: Samsung Pages: 8

Brand: Wagan Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands