LG VR6140LVM Owner'S Manual Download Page 2

Page: 2 / 40

FEATURES

Images of the ceiling and floor are obtained from the sensors of the upper

and lower cameras, and through this, the location of HOM-BOT 2.0 will be

confirmed, therefore, elaborate cleaning can be accomplished for every part

of the room.

As the noise levels are at a quiet 60

dB(A)

, cleaning can be performed at

night.

*60

dB(A)

HOM-BOT 2.0 memorizes the location for cleaning.

* Minimizes the overlapping of cleaning area

The use of the ultra microfiber mop accessory allows finer dust to be

collected from hard flooring. (option)

The HOM-BOT 2.0 also has voice confirmation and instruction that can be

easily understood by the user.

The HOM-BOT 2.0 has two auto cleaning modes that can be selected by

the user.

*Spatial expantion mode, zigzag mode

Camera sensor

(upper, lower section)

“Please, check

the dust bin.”

HOM-BOT 2.0 will start self-diagnosis and will inform you with the voice.

A problem has

been found in the

acceleration sensor.

Summary of Contents for VR6140LVM









































Search results

Summary of Contents for VR6140LVM

Reviews:

Related manuals for VR6140LVM

Brands by name

Popular brands

LG VR6140LVM, Owner'S Manual

Search results

Summary of Contents for VR6140LVM

Reviews:

Related manuals for VR6140LVM

Brands by name

Popular brands