manualshive.com logo in svg

LG V-Net AC Smart II, Owner'S Manual, Page: 97 / 239

Share
Download
LG V-Net AC Smart II Owner'S Manual Download Page 97

Installation/Owner's Manual

5-24

[Indoor unit schedule setting item]

Item

Description

You can set the desired indoor temperature.

You can set the operation and stopping of the indoor unit.
- Run : It operates the indoor unit.
- Stop: It stops the operation of the indoor unit..

You can set the operating mode of the indoor unit.
- Cool: This operates the indoor unit to run cool operation. Execute when the

indoor temperature is high.

- Heat: This operates the indoor unit to run heat operation. Execute when the

indoor temperature is low.

- Auto: The unit evaluates the indoor condition and maintains optimal condition

automatically.

- Dehumidify: This operates the indoor unit to run dehumidifier operation.

When you set this during the rainy season or when it is humid, the
dehumidifier will remove the humidity effectively. When you set to this mode
you cannot set the desired temperature.

- Fan: This operates the indoor unit to run fan operation. When you set this for

air cleaning operation, fresh air will be circulated. In spring and fall, it is good
to use the air cleaner independently When you set the unit to this mode, you
cannot set the desired temperature.

This sets the fan speed of the ventilator. You can adjust the setting
considering the level of indoor contamination.
- Low: This sets the fan speed to low.
- Med: This sets the fan speed to med.
- High: This sets the fan speed to high.
- Auto: This sets to automatically measure the indoor level of contamination

and maintain the optimal condition.

This sets the automatic rotation of the fan.

You can set the lock function of air condition so that the user cannot control
the air conditioner individually.
- All lock: Enable lock function.
- All unlock: This disables the lock function.
- Mode lock - This enables the Mode lock function so that the user cannot

individually control the operating mode of the indoor unit.

- Mode unlock - This disables the mode lock function.
- Fan level lock - This enables the Fan level lock function so that the user

cannot individually control the fan level of the indoor unit.

- Fan level unlock - This disables the Fan level lock function.
- Set temperature lock - This enables the Set temperature lock function so that

the user cannot individually control the indoor temperature setting.

- Set temperature unlock - This disables the set temperature lock function.

Minimum set temperature - You can set the minimum indoor temperature that
can be permitted. 
Maximum set temperature - You can set the maximum indoor temperature.

Set temperature

Operation

Mode

Fan level

Lock

Maximum/Minimum
temperature setting

Wind direction

5. Schedule menu

Summary of Contents for V-Net AC Smart II
















































































































































































































































Reviews:

No comments