manualshive.com logo in svg

LG V-Net AC Smart II, Owner'S Manual, Page: 230 / 239

Share
Download
LG V-Net AC Smart II Owner'S Manual Download Page 230

AC Smart

11-16

Software upgrade

The AC Smart can use the USB memory to upgrade the software of the AC Smart. Keep the following
steps to upgrade the software of the AC Software.

Note: Before upgrading the software

Before upgrading the software, the left USB port of the AC Smart should be connected to the USB
device containing the software update image.

The name of the upgrade file of AC SMART II saved in the USB memory must be
"acsmart_firmware.dat". 

Keep the following steps to upgrade the software of the AC Smart II Software.

1

. When you select the ʻS/W upgradeʼ tab from the ʻAdvanced Environment Settingʼ menu, the

following setting screen will be displayed.
When the message confirming to restart the AC Smart is displayed, press [Yes] button.

Press the [S/W upgrade] button

11. Introduction to Advanced Environment setting

Summary of Contents for V-Net AC Smart II
















































































































































































































































Reviews:

No comments