manualshive.com logo in svg

LG V-Net AC Smart II, Owner'S Manual, Page: 233 / 239

Share
Download
LG V-Net AC Smart II Owner'S Manual Download Page 233

Installation/Owner's Manual

11-19

Database back up and restoring

The AC Smart can back up the critical database to the external USB memory. Also, it can also retrieve
the saved database from the external USB memory to restore.

When you press the ʻDBʼ administration tab from the Advanced Environment Setting menu, you can
back up key database of AC SMART II to the USB memory (A Type) or restore the database saved in
the USB memory to AC SMART II.

Note: Before backing up and restoring the database

Before backing up and restoring the database, the left USB port of the AC Smart should be
connected to the USB device containing the database.

After the database is successfully restored, the software of the AC Smart is restarted.

Back up the database of

AC SMART II to the USB

memory.

Use the database saved in the USB

memory to restore it to AC SMART II.

11. Introduction to Advanced Environment setting

Summary of Contents for V-Net AC Smart II
















































































































































































































































Reviews:

No comments