manualshive.com logo in svg

LG V-Net AC Smart II, Owner'S Manual, Page: 156 / 239

Share
Download
LG V-Net AC Smart II Owner'S Manual Download Page 156

AC Smart

9-2

Registering unit 

When first installing AC Smart, you must register the unit to connect to AC Smart.
When you press the [Unit registration] button located at the bottom of the unit management menu, the
following ʻUnit registrationʼ screen will be displayed. Here you can register a new unit or edit/delete
existing units. Also you can automatically register the unit through unit search.

You can register the unit by automatically registering the unit or directly entering the unit information.
This section describes both methods of registering the unit.

This is the part where you enter the information

to register/edit the indoor unit, ventilator, Eco V

DX, on/off unit and AWHP unit.

You can interface with other

external central controller.

The connected units can

be automatically

searched and registered.

Number of registered

units is displayed by the

type of connected units.

You can add a new unit or

edit/delete the information

of the existing unit. 

List of currently registered

units is displayed.

Reference: Login authority for unit registration

To register a unit in AC SMART II, you must log in as installation specialist authority. You cannot
register the unit with administrator or user login authority.

Caution: Unit registration setting

This function is the menu used by the installation specialist when installing AC SMART
II. Be careful not to let the user reset the product by using this menu.

9. System Menu

Summary of Contents for V-Net AC Smart II
















































































































































































































































Reviews:

No comments