LG V-Net AC Smart II, Owner'S Manual, Page: 133 / 239

Installation/Owner's Manual
6-20
Item Description
Select the group to apply the auto change over operation.
This sets the reference temperature to execute auto change over operation.
The temperature range that can be set is 18°c ~30°c.
Set the temperature difference so that the auto change over function can
operate. When the difference between the reference and indoor temperature
exceeds this temperature, it automatically cha
Select the method to measure the indoor temperature. Indoor temperature can
be measured in one of the three methods below.
- Average: This is the method of operating the auto change over function
based on the average temperature detected for the indoor units within the
group.
- Operating: This is the method of operating the auto change over function
based on the average temperature of the operating indoor units within the
group.
- Fixed: This is the method of operating the auto change over function based
on the temperature detected from the first registered indoor unit within the
group.
This sets whether to execute the auto change over operation function or not.
- Enable: Executes the auto change over operation function.
- Disable: Does not execute the auto change over operation function..
Group name
Set temp.
Temp. difference
Temp. reference
Enable/Disable
3
. When you have completed all the setting, click on the [Save] button. The ʻInformationʼ screen to ask
to save will be displayed. Click on the [Yes] button. 4-81
After clicking on [Save]
button, when the
'Information' screen is
displayed, click on [Yes]
button
6. Auto control menu