
Installation of Indoor Unit
Installation Manual
19
ENGLISH
• It is obligatory to consider the minimal clearance from obstacles for ensuring unobstructed access
for maintenance and service.
• The location of the device has to be accessible by manual transport devices to ensure
undisturbed delivery of replacement parts and equipment for maintenance and servicing.
The operator is charged costs connected with hiring special equipment for installing the device,
servicing and maintenance separately, these costs are not subjected to warranty.
• When you install a device into the building, ensure that you build in a water drain in case of
spillage.
Minimal clearance from the device
The device must not be installed under pipelines because there is a possibility of condensate
forming. Ingress of water condensate can cause disturbances in the operation.
The installation location of the indoor unit must be dry and in the temperature range b10
C and 40 °C.
Location of the device
Summary of Contents for THERMA V AHNW16606B0
Page 38: ...38 Air to Water Heat Pump X5 BUS A BUS B GND 10V Installation of Indoor Unit ...
Page 40: ...40 Air to Water Heat Pump TW TX Ethernet 5 BUS B BUS A GND 10V Installation of Indoor Unit ...
Page 44: ...44 Air to Water Heat Pump Installation of Indoor Unit Electrical scheme ...
Page 65: ......