LG STB-2000 Setup Manual Download Page 41

Page: 41 / 86

206-4256

Cloning Procedures (Cont.)

Learn Setup from Master STB

1. Ensure the Master STB is set up completely and in Pass-through Mode

(i.e., the STB setup menus should be displayed on the screen when you

press

MENU

on the Installer Remote).

2. Insert the USB memory device into either of the USB ports on the Master

STB.

3. Press

MENU

on the Installer Remote to display the STB setup menus.

Use the arrow navigation keys to select/highlight the

Option

menu icon,

and then press the number “

” key a total of seven times to display the

USB Download Menu.

4. To gain access to the “Learn From STB” options in the USB Download

Menu, key in the following number sequence on the Installer Remote:

5. Use the Up/Down arrow keys to select

Learn From STB

(TLX)

, and then

press

6. In the Learn From STB (TLX) window, to differentiate this TLX file from

others, you can use the Up/Down arrow keys to change the last five digits

of the filename. Press

when you are ready to initiate Learning.

Learning status will be shown on a progress bar in a new window. Do NOT

remove the USB device until Learning is complete. When the Learning

process is complete, the USB Download menu will reappear on the screen.

7. When Learning is done, press on the Installer Remote to exit the USB

Download Menu, and remove the USB memory device from the Master

STB.

Teach Master STB Setup to Target STB

1. Turn ON the Target STB/display panel.
2. The next step depends on whether the EZ-Manager Wizard appears on

the screen when you turn ON the STB/display:
• If the wizard is displayed, the STB is in the required factory default state.

To continue with this procedure (see also note below), exit the wizard,

and then continue with step 3.

• If the wizard is not displayed, restore the STB to a factory default

condition before continuing with this procedure. See Reference section,

“Restoring Factory Defaults on the STB(s),” as necessary, for further

information.

Note:

If desired, you can complete the Teaching process via the EZ-

Manager Wizard (see “USB Configuration” on pages 21 to 22) or using

the LG Smart Install utility (see “LG Smart Install Utility” on pages 23 to 24).

Learn From STB

UPDATING...

Do not unplug!

25%

Learn From STB (TLX)

Select the file name and press OK to start

STB-2000-UA00003.TLX

USB Download Menu

Upgrade STB Software
Upgrade PTC Software
Diagnostics
Teach To STB (TLL)
Teach To STB (TLX)
Learn From STB (TLL)

Learn From STB (TLX)

Note: The Diagnostics option in

this menu is for service use only.

(Continued on next page)

Summary of Contents for STB-2000























































































Search results

Summary of Contents for STB-2000

Reviews:

Related manuals for STB-2000

Brands by name

Popular brands

LG STB-2000, Setup Manual

Search results

Summary of Contents for STB-2000

Reviews:

Related manuals for STB-2000

Brands by name

Popular brands