LG RS 485 User Manual Download Page 2

Page: 2 / 26

Thank you for purchase of LG RS 485 Option Board!

SAFETY PRECAUTIONS

Always follow safety precautions to prevent accidents and potential hazards from occurring.

Safety precautions are classified into “WARNING” and “CAUTION” in this manual.

WARNING

CAUTION

Throughout this manual we use the following two illustrations to make you aware of safety

considerations:

Identifies potential hazards.

Read the message and follow the instructions carefully.

Identifies shock hazards.

Particular attention should be directed because dangerous voltage may be present.

Keep this manual at handy for quick reference.

CAUTION

Do not touch the CMOS components unless the board is grounded.

ESD can cause break down of CMOS components.

Do not change the communication cable with the inverter power is applied.

Otherwise, there is a danger of connecting error and damage to the board.

Make sure to precisely insert the connector of inverter and option board

Otherwise, there is a danger of connecting error and damage to the board.

Check the parameter unit when setting the parameters.

Otherwise, there is a danger of connecting error and damage to the board.

Indicates a potentially hazardous situation which, if not avoided,

can result in serious injury or death.

Indicates a potentially hazardous situation which, if not avoided,

can result in minor to moderate injury, or serious damage to the

product.

Morek IT OÜ, Rauna 24, 76506 Saue Harjumaa, Estonia. www.morek.eu Tel. +372 604 1423 Fax +372 604 1447 [email protected]

Summary of Contents for RS 485



























Search results

Summary of Contents for RS 485

Reviews:

Related manuals for RS 485

Brands by name

Popular brands

LG RS 485, User Manual

Search results

Summary of Contents for RS 485

Reviews:

Related manuals for RS 485

Brands by name

Popular brands