36
206-4270
If you are unable to establish remote communication with the PCS200S, refer to the
following flow chart.
Troubleshooting (Cont.)
PCS200S Communication
Cannot Communicate
with PCS200S
No
Yes
End
Problem
solved?
Ensure your PC’s IP address
is on the same subnet as the
PCS200S’s IP address. If
necessary, adjust and then
reattempt communication.
Note: For example, if the PCS200S is
configured with IP address: 192.168.1.x
and Network mask: 255.255.255.0, the
PC’s IP address cannot be: 192.168.2.x.
No
Yes
End
Check that the proper IP
address for the PCS200S
is being targeted. If
necessary, adjust and then
reattempt communication.
To verify the PCS200S IP address:
•
If DHCP is enabled, check the router for DHCP IP address
assignments to determine whether the proper IP address is being
used to communicate with the PCS200S.
•
If DHCP is not enabled, connect a PC to the PCS200S Service
Port, display the System Information, and ensure the IP address
shown in the Ctrl IP field is the IP address being used to
communicate with the PCS200S. If necessary, update the Control
Port configuration as described in this document.
Problem
solved?
Contact LG.
