23
206-4270
(Continued from previous page)
Current Network Configuration
Interface eth0
Host name:
pcs200s
Using DHCP:
YES
Interface eth1
Host name:
pcs200s
Using DHCP:
NO
Host IP address:
Network mask:
Gateway IP address:
Speed:
1000Mbps
DNS servers
Primary DNS:
xxx
.
xxx
.
xxx
.
xxx
Secondary DNS:
xxx
.
xxx
.
xxx
.
xxx
--------------------------
Network Configuration Menu
--------------------------
eth0
Configure Control Port IP
eth1
Configure Feature Port IP
dns
Configure DNS
exit
Exit network configuration
Choose item to modify >
3. Either:
•
Continue with step 4 for information on modifying the IP configuration of either the Control
Port or the Feature Port.
•
Go to step 10 for information on modifying the DNS configuration.
•
To exit the Network Configuration Menu without modifying any settings, type
exit
at the
Network Configuration Menu
>
prompt.
4. Type
eth0
or
eth1
, as applicable, and press
Enter
to modify the configuration of the
Control Port or the Feature Port, respectively.
5. At the
Host name [pcs200s]:
prompt, either press
Enter
to accept the default value in
square brackets, or type a new host name and then press
Enter
.
6.
(Control Port configuration only)
At the
Using DHCP (Y/N) [Y]:
prompt, type
y
to use
DHCP, or type
n
to specify the network IP addresses. Then, press
Enter
.
PCS200S Configuration Options (Cont.)
(Continued on next page)