74
INSTALLATION INSTRUCTIONS
ENGLISH
Installer Setting - Override Master/Slave Setting
Since Multi V II, the override master/slave function is to prevent product's different mode opera-
tion. If it is setup as the slave, any changes to run in the opposite mode from the outdoor unit are
blocked.)
Function Code
Master/Slave
Select Master/ Slave by pressing
buttons.
(00: Slave, 01 : Master)
3
Press the button for 3
seconds to enter the Thermostat
installer setting.
- If pressed for a shorter time, it
enters into user setup mode.
1
Press the button repeatedly to move to
override master/slave selection menu as
pictured below.
2
Press button to save.
4
Press button to exit setting mode.
After setup, it automatically exits after 25
seconds if there is no input. If the
Setting/Cancel button is not pressed, the
mode will not change.
5
h
Override master/slave selection function is possible to use only when it is connected to the
succeeding models of Multi V II series.
• If it is set as Override Slave, icon
is displayed on LCD Display Window.
Summary of Contents for PREMTB10U
Page 94: ...94 ENGLISH ...