background image

Safety Precautions   

Owner's Manual 

5

ENGLISH

Do not block the inlet or
outlet of air flow.

• It may cause product failure.

Use a soft cloth to clean. Do
not use harsh detergents,
solvents, etc.

• There is risk of fire, electric shock,

or damage to the plastic parts of
the product.

Do not touch the metal parts of
the product when removing the
air filter. They are very sharp!

• There is risk of personal injury.

Do not step on or put
anyting on the product.
(outdoor units)

• There is risk of personal injury

and failure of product.

Always insert the filter securely.
Clean the filter every two weeks
or more often if necessary.

• A dirty filter reduces the efficiency

of the air conditioner and could
cause product malfunction or
damage.

Do not insert hands or other
objects through the air inlet or
outlet while the product is operated.

• There are sharp and moving parts

that could cause personal injury.

Do not drink the water
drained from the product.

• It is not sanitary and could cause

serious health issues.

Use a firm stool or ladder
when cleaning or
maintaining the product.

• Be careful and avoid personal

injury.

Replace the all batteries in the
remote control with new ones of
the same type. Do not mix old
and new batteries or different
types of batteries.

• There is risk of fire or explosion

Do not recharge or disassemble the batteries.
Do not dispose of batteries in a fire.

• They may burn or explode.

If the liquid from the batteries gets onto your
skin or clothes, wash it well with clean water. Do
not use the remote if the batteries have leaked.

• The chemicals in batteries could cause burns or other

health hazards.

n

Installation

CAUTION

n

Operation

Always check for gas
(refrigerant) leakage after
installation or repair of product.

• Low refrigerant levels may cause

failure of product.

Install the drain hose to
ensure that water is drained
away properly.

• A bad connection may cause

water leakage.

Keep level even when
installing the product. 

• To avoid vibration or water

leakage.

Do not install the product where the
noise or hot air from the outdoor unit
could damage the neighborhoods.

• It may cause a problem for your

neighbors.

Use two or more people to
lift and transport the
product. 

• Avoid personal injury.

Do not install the product where
it will be exposed to sea wind
(salt spray) directly.

• It may cause corrosion on the

product. Corrosion, particularly on
the condenser and evaporator fins,
could cause product malfunction or
inefficient operation.

Do not expose the skin directly to cool air for
long periods of time. 
(Don't sit in the draft.)

• This could harm to your health.

Do not use the product for special purposes, such as
preserving foods, works of art, etc. It is a consumer air
conditioner, not a precision refrigeration system.

• There is risk of damage or loss of property.

Summary of Contents for P05AH






















Reviews: