A/CL
A/CL
(Heat pump Model)
1
10
4
16
16
13
6
17
5
8
11
12
7
2
3
14
1
9
4
13
6
15
5
8
11
12
10
2
3
14
(Cooling Model)
8
Floor Standing-Type Air Conditioner
Operating Instructions
Name and Function-Remote Control
1. Signal Transmitter
• Transmits the signals to the floor standing type air
conditioner
2. Operation Display of the Remote Control
3. Indoor Fan Speed Selection Button
• To select the desired fan speed in two steps [Low, Mid]
4. Cooling ON Button
5. Temperature Setting Buttons
6. Power ON/OFF Button
• Operation will start when this button is pressed, and
stop when the button is pressed again.
7. Auto Airfloor Direction Control Button
(No application)
• The horizontal louvers swing up and down.
8. Auto Airflow Direction Control Button
• The vertical louvers swing left and right.
9. Auto Mode Operation Button (Cooling Model Only)
10. Heating Button (Heat Pump Model)
11. Plasma Air purifying Button
12. Timer Set Button
• Each time the button is pressed, the mode is changed
in the following process.
Time set (1, 2, 3, 4, 5, 6, 7 hours)
If you select "0" the off Timer function will be
cancelled.
13. Soft Dry Operation Button
14. JET Cool Operation Button
15. Auto Air Flow Operation Button
16. Electric heater On/OFF Button(Heat pump &
Electric heater product only)
17. ENERGY Saving Operation Button(No application)
Handling the remote control
• Aim at the signal receptor on the floor standing type air
conditioner when operating.
• The remote control signal can be received at a distance of up to
about 7meters.
• Be sure that there are no obstructions between the remote
control and the signal receptor.
• Do not drop or throw the remote control.
• Do not place the remote control in a location exposed to direct
sunlight, or next to a heating unit, or other heat source.
Wireless Remote Control Puts all functions at your fingertips
Summary of Contents for P05AH
Page 21: ......
