background image

English

Español (LE)

Instrucciones de Operación

Aire Acondicionado

2-13

Antes de utilizar la unidad, lea atentamente estas

instrucciones de funcionamiento y consérvelas como 

futuro elemento de consulta.

El instalador debe guardar y leer las Instrucciones de 

instalación incluidas antes de la instalación. 

El control remoto viene embalado en la unidad interior y 

debe ser retirado por el instalador antes de la instalación.

Operating Instructions

Air Conditioner

14-25

Before operating the unit, please read these operating 

instructions thoroughly and keep them for future reference.

The included Installation Instructions should be kept and 

read by the installer before installation. 

Remote control is packaged in the indoor unit and 

removed by the installer before installation.

Instrucciones de Operación

Aire Acondicionado

Inverter Technology
Tecnología Inverter

Modelo

Unidad Interior 

Unidad Exterior

CS-S9VKV-2

CS-S12VKV-2

CS-S18VKV-2

CS-S24VKV-2

CS-S28VKV-2

CU-S9VKV-2

CU-S12VKV-2

CU-S18VKV-2

CU-S24VKV-2

CU-S28VKV-2

ACXF55-21790

ACXF55-21790_FC1806-00_S ��.indb   1

2019/4/24   10:11:38

Summary of Contents for CS-S9VKV-2

































Reviews: