MS- E10 User Guide
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp. 47
Included in this view are commands and related dialogs in which you can:
•
Set the date and time in the MS-E10 device.
•
Change TLS settings used by the MS-E10 device for secure “platformssl” access, including configured state,
platformssl port (HTTPS Port), PKI certificate, and TLS protocol. The default port is 5011.
Note that in Niagara 4, “SSL” is always implemented using the TLS (Transport Layer Security) protocol. See the Niagara Station
Security Guide for complete details.
•
Enable or disable SFTP (Secure File Transfer Protocol) and SSH (Secure Shell) access to the MS-E10 device. By
default, such access is disabled, where both protocols use TCP port 22.
Note:
Although SFTP and SSH are more secure than FTP and Telnet access, enabling still poses security risks. We strongly
recommend that you keep this access disabled, unless otherwise directed by Systems Engineering. Upon completion of any use,
such access should be disabled once again.
•
View daemon output and change logging levels.
•
Enable debug access for temporary browser access to platform daemon diagnostic tools
•
Perform other platform tasks initially performed with the Commissioning Wizard, such as modifying platform admin
users (User Accounts), configuring runtime profiles, and so on.
For more details, see the “Platform Administration” section in the Niagara Platform Guide.
Performing platform administration
Prerequisites:
•
The MS-E10 device is already commissioned using the Commissioning Wizard.
Step 1 Using Workbench, open a platform connection to the MS-E10 device. Use the platform credentials you specified when
creating a platform user while commissioning the device.
Step 2 In the MS-E10 device platform’s Nav Container View, double-click Platform Administration.
Step 3 In the Platform Administration view, click any of the following to review or make changes:
•
View Details — A platform summary that you can copy to the Windows clipboard.
•
User Accounts — A platform daemon authentication dialog to add, delete, or manage platform users (initially
performed as a step in the Commissioning Wizard).
•
System Passphrase — A dialog to set or change the system passphrase used to encrypt sensitive information
on the platform’s filesystem.
•
Change TLS Settings — A dialog to specify platform SSL settings, including enabling/disabling, port, PKI
certificate to authenticate by, and secure protocol to use. Details are beyond the scope of this document. For
an overview, see “Change SSL (TLS) Settings” in the
Niagara Platform Guide
. For complete information, refer
to the
Niagara Station Security Guide
.
•
Change Date / Time — A dialog to change the device’s current date, time, and time zone (initially performed
as a step in commissioning wizard).
