MS- E10 User Guide
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp. 35
Figure 21: System passphrase
Note:
When you create a system passphrase be sure to make a note of it and guard it carefully! If you lose the system passphrase,
you will lose access to encrypted data. You can change the system passphrase using the Platform Administration tool.
Remove default platform user account
In this Commissioning Wizard step, you specify platform login credentials (user name and password) to replace
the factory-default platform user in this MS-E10 device.
Figure 22: Initial dialog to replace the factory-default platform user account
Note:
The Commissioning Wizard in Niagara 4 prevents commissioning the MS-E10 device that retains the factory default
platform user account. To proceed, you must enter a different user name, along with a “strong” password (this
means a minimum of 10 characters including: at least one uppercase character, at least one lowercase character,
and at least one digit).
Following your entry in this dialog, another step (if pre-selected) lets you create additional platform admin users, if
needed. Each platform user must have a unique user name and use a “strong” password. Up to 20 total users are
supported. Note each platform user account has the same (full) platform admin access—users can change their
password, and even create additional platform admin accounts.
•
User name and password entries are case sensitive.
