manualshive.com logo in svg

LG MultiSITE MS8250, User Manual

Share
Download
LG MultiSITE MS8250 User Manual Download Page 51

51

User Manual

Due to our policy of continuous product innovation, some specifications may change without notification.  

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.

Lock screen

1/3 Display

Color

White

User HMI

0

Main display

Temp.

Standby screen

No

No

Contrast

0

Table 30: Display Screen 1 / 3 Parameter Details.

Configuration Parameters Default Value

Significance and Adjustments

User HMI

Default Value: 0

Sets layout of icons on the home screen for various applications. Refer to the “Customized 

User HMI Display” section starting on page 13 for more information.
Range: 0 to 12.

Color (HMI Color)

Default Value: White

Change background color of the display screen.
Choices: White, Green, Blue, Grey, Dark Grey, Pink, Purple, Red, Orange, Black.

Main Display

Default Value: Temp.

Shows temperature or setpoint on main display.
Choices: Temp., Setpoint, T. + set.

Standby Screen

Default Value: No

When the device is left unattended for 150 seconds, the standby image will appear. A 

custom image can be uploaded using the Uploader Tool.
No: No Stand by image (Screen dims when no motion is detected). 

Yes: Stand by Image is displayed after 150 seconds. 

Occ. Only: Standby image displays after 150 seconds. Screen turns off after 30 minutes 

only in occupied or override mode. 

Screen: Standby image displays after 150 seconds. Screen turns off after 30 minutes only 

in unoccupied or standby mode.
Choices: No, Yes, Occupied Only or Screen.

Lock Screen

Default Value: No

Prevents the user from accessing the Room Controller until a password is entered. Screen 

lockout starts 150 seconds after no activity on the Room Controller (when standby image 

appears). 
This functionality is enabled only if the below conditions are met: 
• Standby image loaded.
• Standby Screen = “Yes” or “Screen Saver”.
• User Password = not 0.
Choices: No or Yes.

Contrast

Default Value: 0

Control screen contrast and brightness.
Range: -5 to +5.

DISPLAY SCREENS

Display Screen 1 / 3

Display Screen 1 / 3

Figure 37: Display Screen 1 / 3

Summary of Contents for MultiSITE MS8250

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands