31
User Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
NETWORK SCREENS
Wi-Fi BACnet Network Settings
Wi-Fi BACnet Network Settings
BACnet network screens are shown when the wired protocol is set to BACnet, or a Wi-Fi module is installed with BACnet/IP enabled. Only
one BACnet protocol can be used at a time, either the wired protocol BACnet MS/TP (BACnet Network screens), or the Wi-Fi BACnet IP (Wi-
Fi screens).
BACNET Instance Number
The default BACnet instance number is generated by the model number and COM address of the Room Controller. For example, the in-
stance number of a MS8250U5B00 with a COM address of 57 is generated as “82057”.
The default instance number appears first. To change the instance number, use number pad and press Accept and Save.
Tap “R” icon to reset to automatic instance addressing.
1/2 BACnet Network
Network lang.
English
Port
0x0000
Network units
SI
0
8
2
0
0
5
7
2/2 BACnet instance
Instance Number of
Controller
Accept and Save
Reset to Automatic Instance Addressing
Figure 20: BACnet Network Settings Display.
Figure 21: BACnet Instance Setting Display.
Table 13: Wi-Fi BACnet Network Setting Details.
Configuration Parameters Default Value
Significance and Adjustments
Network Units (Measurement Units)
Default Value: SI
Network units transmitted over the BACnet network.
Use the Temperature scale parameter to change the display units locally on the Room Controller.
Imperial: Network units shown as Imperial units.
SI: Network units shown as International Metric units.
Choices: Imperial or SI.
Network Lang (Network Language)
Default Value: English
Network language/object names transmitted over network.
Choices: English, French, or Spanish.
Port
Default value: 0
Read Only
The unique short address of Wi-Fi BACnet IP.
