manualshive.com logo in svg

LG MULTI F MAX, Engineering Manual, Page: 79 / 224

Share
Download
LG MULTI F MAX Engineering Manual Download Page 79

STD. WALL-MOUNTED   |   79

Standard W

all-Mounted

Due to our policy of continuous product innovation, some specifications may change without notification. 

 

©

LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.

MULTI 

F

MAX

MULTI 

F

Factory Supplied Parts

Factory Supplied Materials

• Owner’s Manual

• Installation Manual

• Level

• Screwdriver

• Electric drill

• Hole core drill

• Flaring tool set

• Spanner (Half union)

• Thermometer

Factory Supplied Parts and Materials

Table 38:

 Parts Table.

Required Tools

STANDARD WALL-MOUNTED INDOOR UNITS

Part

Quantity

Image

Installation Plate

One (1)

Type “A” Screws

Five (5)

Type “B” Screws

(M4 x 12L)

Two (2)

Wireless 

Controller with Holder

HVT:  AKB73635606

HSV:  AKB73835312

One (1)

7,000 ~ 15,000 Btu/h Indoor Units 18,000 and 24,000 Btu/h Indoor Units

• Read all instructions before installing the product.  

• 

Installation work must be performed by authorized personnel and in accordance with the national wiring standards and all local 

codes.

Summary of Contents for MULTI F MAX

































































































































































































































Reviews:

No comments