LG MULTI F MAX Engineering Manual Download Page 47

Page: 47 / 224

Factory Supplied Parts

Part

Quantity

Image

Installation Guide

One (1)

Type “A” Screws and

Plastic Anchors

Four (4)

Each

Type “B” Screws

(M4 x 12L)

Two (2)

Wireless Handheld

Controller with Holder

(AKB73635607)

One (1)

Factory Supplied Materials

• Owner’s Manual

• Installation Manual

• Level

• Screwdriver

• Electric drill

• Hole core drill

• Flaring tool set

• Spanner (Half union)

• Thermometer

• Read all instructions before installing the product.

•

Installation work must be performed by authorized personnel and in accordance with the national wiring standards and all local

codes.

Factory Supplied Parts and Materials

Table 27:

Parts Table.

Required Tools

ART COOL GALLERY INDOOR UNITS

ART COOL GALLERY™ | 47

Art Cool Gallery™

Due to our policy of continuous product innovation, some specifications may change without notification.

MULTI

MAX

MULTI

Summary of Contents for MULTI F MAX

































































































































































































































Search results

Summary of Contents for MULTI F MAX

Reviews:

LG MULTI F MAX, Engineering Manual, Page: 47 / 224

Search results

Summary of Contents for MULTI F MAX

Reviews: