33
USING THE PROJECTOR
USING THE PROJECTOR
Connecting to an Antenna or Cable
To watch TV using an indoor/
outdoor antenna, connect a wall
terminal and the
port of the Projector using an RF
cable (75 Ω).
You can watch terrestrial or cable
(analog or digital) TV.
(The RF cable is sold separately.)
•
Make sure not to bend the copper wire of the RF cable (75 Ω). Turn
the input jack to the right to fasten it.
Copper wire
•
Ensure you use a standard coaxial cable (75 Ω, sold separately)
when connecting to the projector input.
•
For better image quality in locations where signal strength is low,
purchase and install a signal amplifier (booster).
•
A signal splitter is required if you want to use two or more projectors
through one antenna.
•
If you have any problems when installing the antenna, please consult
a suitable retailer or the store where you purchased the antenna.
NOTE
Summary of Contents for Minibeam PH550
Page 124: ......
