LG Minibeam PH550 Page 50 Owner'S Manual Download

Page: 50 / 124

ENTERTAINMENT

Setting Up Bluetooth on the Projector

This option is used to output sound from the projector through Bluetooth

audio devices.

•

Press the

SETTINGS

button on the remote control, and then set

Bluetooth

in the

WIRELESS

menu.

•

The devices that can be connected are as follows: LG BTS1, LG

HBS-700, LG HBS-730, LG HBS-800 (Models available for purchase

may vary by region.)

•

Products from other manufacturers may not be compatible.

•

You can use the remote control to adjust the volume of the

connected device.

•

When connecting devices wirelessly, if the device connection fails,

check that the device is connected to a power supply and also check

that the Bluetooth audio device is operating properly.

•

Bluetooth

is turned on, the projector will automatically connect

to the last connected Bluetooth device when the projector powers

on. (Be sure to check that the last connected Bluetooth device is

powered on as well.)

•

This projector does not support the LG TV Sound Sync feature. To

use products that support the LG TV Sound Sync feature, use the

general Bluetooth mode instead of the LG TV mode.

•

The Bluetooth function is to connect the product to Bluetooth

speakers or Bluetooth headset. You cannot connect the product to a

mobile phone through the Bluetooth function.

NOTE

Summary of Contents for Minibeam PH550





























































































































Search results

Summary of Contents for Minibeam PH550

Reviews:

Related manuals for Minibeam PH550

Brands by name

Popular brands

LG Minibeam PH550, Owner'S Manual

Search results

Summary of Contents for Minibeam PH550

Reviews:

Related manuals for Minibeam PH550

Brands by name

Popular brands