LG M6100 Service Manual Download Page 128

Page: 128 / 160

9. ENGINEERING MODE

- 129 -

9.3.7 MicSpk Test

The sound from MIC is recorded for about 3 seconds, then it is replayed on the speaker automatically.

9.4 Trace option [MENU 4]

This is NOT a necessary menu to be used by neither engineers nor users.

9.5 Call timer [MENU 5]

This menu is to set the Digital Audio Interface Mode for Speech Transcoder and Acoustic testing.

1) All calls : This displays total conversation time. User cannot reset this value.

2) Reset settings : This resets total conversation time to this, [00:00:00].

3) DAI DOWNLINK : Speech decoder test

4) DAI OFF : DAI mode off

9.6 Fact. Reset [MENU 6]

This Factory Reset menu is to format data block in the flash memory and this procedure set up the

default value in data block.

Attention

Fact. Reset (i.e.Factory Reset) should be only used during the Manufacturing process.

Servicemen should NOT progress this menu, otherwise some of valuable data such as Setting

value, RF Calibration data, etc. cannot be restored again.

9.7 S/W version

This displays software version stored in the phone.

Summary of Contents for M6100

































































































































































Search results

Summary of Contents for M6100

Reviews:

Related manuals for M6100

Brands by name

Popular brands

LG M6100, Service Manual

Search results

Summary of Contents for M6100

Reviews:

Related manuals for M6100

Brands by name

Popular brands