32
Initial Configuration and Operation
System Reboot
Press [Reboot] button to restart your system. If the device
is not working properly, try restarting your system with this
menu.
Backup & Restore
>
Backup: All of the configuration items in the Settings
menu can be backed up.
1. Press [Backup] button. A download message
window will appear.
2. Press [Save] button.
3. Browse to the target destination folder to save the
backup file and input the desired file name of the
backup file.
4. Save the backup file by clicking on the [Save]
button.
>
Restore: You can restore your system to the backup status
when there are an accidental or erroneous adjustments
made on the settings.
1. Press [Browse] button.
2. Select the backup file you wish use to restore the
system.
3. Press [Restore] button. A confirmation message
window will show up, and press [OK] button to
initiate the recovery process. The system will be
restored to the previous setting that is backup in,
and the camera will re-start. Shut down the web
browser and connect to the device again.
Note:
• The backup and recovery functionalities can only work
when the system that you will apply the backup file has
the same firmware version. These functionalities cannot be
used for multi-layered environment or a firmware upgrade.
• Backup is only possible under HTTP protocol. HTTPS
protocol does not support backup functionality.
