LG LS301CE Service Manual Download Page 65

Page: 65 / 71

Service Manual 65

Troubleshooting Guide

OUTDOOR UNIT

Connector Type

Condition

OPEN

• PWB pattern is damaged when applying the power.

Connecting reversely

OPEN

Connecting error

(

)

Connecting error

(

)

Connecting error

(

)

Connecting error

(

)

Connecting error

(

)

Connecting error

(

)

• All functions stop.
• The operation with the remote controller, forced and

test one do not operate.

• All functions stop.
• The operation with the remote controller, forced and

test one do not operate.

• The Indoor Fan does not operate.

• The signal of remote controller is inputted, but the

product does not operate.

• The RED indicator of outdoor unit and the operation

indicator of indoor one blinks 5 times after 2 minutes
with applying the power.

• No power for Indoor unit.
• The signal input of the remote controller and opera-

tion of product is impossible.

• The thermal protector of the Power Trans operates

when let it alone for long time.

• The signal of the remote controller is inputted.
• The fuse and Q61 in the Outdoor unit are damaged

when the indoor fan is operated.

• No power for Indoor unit.
• The signal input of the remote controller and opera-

tion of product is impossible.

• The RED indicator of the Outdoor unit blinks 5 times

after 2 minutes with applying the power.

• All functions stop.
• The operation with the remote controller, forced and test

one do not operate.

• The only signal of remote controller operation/stop is

inputted, but the product does not operate.

• The RED indicator of outdoor unit blinks 5 times after 2

minutes with applying the power.

• The beep sound, such as "beep, beep, beep, beep,

beep", occurs periodically in Indoor unit.

• The signal input of a remote controller and operation of

product is impossible.

• The RED indicator blinks 5 times after 2 minutes with

applying the power.

• All functions stop or the compressor does not operate.
• The operation with the remote controller, forced and test

one do not operate.

• All functions stop.
• The operation with the remote controller, forced and test

one do not operate.

CN-POWER

RY-COMP

terminal

CN-TRANS

CN-FAN

The connecting

wire of CN-

DC/DC, and

Indoor and

Outdoor Unit

Blue
Black
Brown
Red

Phenomena

Summary of Contents for LS301CE








































































Search results

Summary of Contents for LS301CE

Reviews:

Related manuals for LS301CE

Brands by name

Popular brands

LG LS301CE, Service Manual

Search results

Summary of Contents for LS301CE

Reviews:

Related manuals for LS301CE

Brands by name

Popular brands