Service Manual 35
8. Forced Operation
To operate the appliance by force in case that the remote controller is
lost, the forced operation button is on the main unit of the appliance to
operate the appliance in the standard conditions.
• Press the forced operation button, the forced operation is carried out.
• Press the forced operation button once again to stop operation.
In case the power comes on again after power failure on the Forced
Operation position, the operating conditions are automatically set as fol-
lows:
During Forced Operation, the initial mode continues.
9. AUTO RESTART
In case the power comes on again after a power failure, Auto Restarting
Operation is the function to operate procedures automatically to the pre-
vious operating conditions.
If you want to use this operation. The autorestart button is on the main
unit of the appliance in the standard condition.
• press the auto restart button, to make this function active.
• If you do not want to use this operation, free the auto restart button
once again.
If you do not want to use this operation, move the Slide Switch to the
Remote Control position.
Cooling
Heat pump Model
Model
Room Temp.
≥
76°F(24°C) 70°F(21°C)
≤
Room Temp. < 76°F(24°C) Room Temp. < 70°F(21°C)
Operating mode
Cooling
Cooling
Healthy Dehumidification
Heating
Indoor FAN Speed
High
High
Healthy Dehumidification Rule
High
Setting Temperature 72°F(22°C)
72°F(22°C)
74°F(23°C)
76°F(24°C)
AUTO
RESTART
FORCED
FORCED
OPERATION
OPERATION
FORCED
OPERATION
AUTO
RESTART
AUTO
RESTART
FORCED
OPERATION
Operation
