Service Manual 19
Flaring work and connection of piping
■
Bundle the piping and drain hose together by
wrapping them with cloth tape over the range
within which they fit into the rear piping housing
section.
8. Reroute the pipings and the drain hose across the
back of the chassis.
9. Reinstall the parts to the original position.
■
Refix the lower panel to the original position.
■
Connect display conductor.
■
Refix the front right side panel to the original
position with the two screws.
Drain hose
Vinyl tape(narrow)
Pipe
Wrap with
vinyl tape(wide)
Lower panel
Main PCB
Piping for
passage through
piping hole
