LG LRG30855S Series, Training Manual

Page: 43 / 74

GAS RANGE Page 42 of 72 TRAINING MANUAL
DOOR LATCH ASSEMBLY
The door latch assembly consists of a lock motor, cam and switch assembly, lock
hook, and mounting plate. It will be supplied as a complete assembly. The door
latch assembly is located under the main top in a recess that is concealed by a
metal cover.
To replace the door latch assembly:
1. Remove the oven door.
(See page 18.)
2.
Remove the main top.
(See page 21.)
3.
Remove the two ¼” hex screws that
attach the shield to the top right side
of the manifold panel.
4. Remove the four ¼” hex screws
that hold the latch assembly cover
in place.
5.
Remove the cover.
6. Mark and disconnect the wiring from
the latch assembly.
7. Remove the two T-15 Torx
®
screws
that attach the latch assembly to the
frame and slide the assembly out of
the recess.