LG LRG30855S Series, Training Manual

Page: 49 / 74

GAS RANGE Page 48 of 72 TRAINING MANUAL
CLEAN and LOCK SEQUENCE
Programming the Clean Cycle:
Press
SELF-CLEAN pad. 4 hours and 20 minutes ( 4:20 ) appears on the time
display. (Cleaning time can be changed from the 4 hour and 20 minute starting
point by pressing the
SELF-CLEAN pad a second time.)
After
START has been pressed, the word ON illuminates in red and the word
LOCKED flashes to indicate the cycle has begun.
Locking the Door:
After programming the clean cycle and pressing
START pad, the control
energizes the lock relay. Voltage (120 VAC) is applied to the lock motor circuit.
Oven door must be closed before lock motor can run.
LOCKED will flash and
control will beep until the door is closed.
The lock motor begins to revolve and turns a cam mounted to the motor shaft.
The word
LOCKED will flash on and off on the display while the lock motor is in
motion.
As the cam revolves about ½ revolution (approximately 12 seconds), it has
moved the lock hook into a corresponding slot in the oven door which secures
the door.
The words
LOCKED and ON with the clean cycle time remaining will be
displayed.