LG LDK24 ADSL Router Programming Manual Download Page 78

Page: 78 / 100

Programming Manual for Digital Key Telephone System

LDK-

300 & LDK-100

System Features

3-33

VMIB Message for SOS Paging

Description

The system allows to be recorded multiple VMIB
messages for pre-recorded paging. Depending on

circumstance, user can use pre-recorded

messages for paging. Recorded VMIB message is
paged to a page zone at emergency.

Operation

To assign {VMIB SOS Paging} at a flexible button,
1. Press the

[TRANS/PGM]

button.

2. Press a flexible button to assign.

Dial paging code (5xx).

Dial Message number (001~070)

Press the

[HOLD/SAVE]

button.

To activate VMIB SOS paging,

1. Press the assigned {VMIB SOS Paging}

flexible button.

Condition

1. This feature can be only activated by pressing

assigned flexible button on a keyset in idle

state.

2. The VMIB message for SOS Paging can be

recorded only at attendant station.

3. Paging zone includes internal, external and

all call paging area.

4. VMIB SOS paging is not restricted by VMIB

Paging timer. The whole DUV SOS paging

can be paged even though Paging Timeout

timer expires.

Night and Weekend VMIB Service

Description

A CO line can be programmed that assigned

VMIB message is played in Day, Night, Weekend
or On-demand mode automatically. Also, the CO

line may be dropped after the assigned VMIB

message is played by Admin programming.

Operation

It is operated when assigning the VMIB message
with digit # by Admin programming.

Admin Programming

CO Line Ring Assignment (PGM 144)

Weekly Time Table (PGM 233)

Condition

1. The system mode is determined by Day/Night

/Weekend/On-demand mode feature.

2. This feature can be only activated in DISA

line.

3. This feature has higher priority than DISA. If

both Night/Weekend VMIB Service feature

and DISA feature are enabled, DISA is not

activated.

VMIB MOH

Description

Attendant can record VMIB MOH announcement

and it can be used as the MOH source of the
system.

Operation

To set the VMIB MOH as MOH source,
Set the MOH type as VMIB MOH type by Admin

programming.

Admin Programming

VMIB Slot Assignment (PGM 103)

MOH Type (PGM 171-BTN 2)

Condition

1. VMIB MOH message should be recorded

before setting VMIB MOH as system MOH

source.

2. While attendant operating system greetings

and prompt including VMIB MOH, VMIB MOH

is stopped.

3. When VMIB MOH is used as system MOH, 1

port of VMIB should be always reserved for

MOH even though MOH is not used.

Summary of Contents for LDK24 ADSL Router





































































































Search results

Summary of Contents for LDK24 ADSL Router

Reviews:

LG LDK24 ADSL Router, Programming Manual, Page: 78 / 100

Search results

Summary of Contents for LDK24 ADSL Router

Reviews: