manualshive.com logo in svg

LG LDK24 ADSL Router, Programming Manual, Page: 56 / 100

Share
Download
LG LDK24 ADSL Router Programming Manual Download Page 56

Programming Manual for Digital Key Telephone System 

 

                                  LDK-

300 & LDK-100   

  

 

 

         

System Features 

 

 

3-11 

 

digits may be dialed. 

In CO COS 1, it is restricted by STA COS. 

In CO COS 2 and STA COS 2/4, it is restricted 
by Exception Table A. There is no restriction in 

STA COS 1/3. In STA COS 5, long distance 

call is not allowed and max. 8 digits can be 
dialed. 

2.  Rule of CO line Allow/Deny Restriction 

If there is no entries, no restriction is provided 

by the table.   

If there are entries in the Deny table, then 

restriction is on a 'Deny Only' basis. 

If  there are entries in the Allow table,  then 

restriction is on a 'Allow Only' basis. 

If there are entries in both the Allow and Deny 

Tables, the Allow Table is searched, if the 

dialed number matches an entry in the Allow 

Table, the call is allowed. If a match is not 
found the Deny Table is searched and, if a 

match is found in the Deny Table, the number 

is restricted otherwise, the number is allowed. 

 

3.General Conditions 

If  ‘Incoming CO Call Toll Check’ is set, the 

COS rule is applied when the station dials 

digits after answering the incoming CO call. 

 

Day/On-demand/Night/Weekend  
STA COS 

Description 

This feature allows a station to have different STA 

COS when the system is in On-demand/Night/ 

Weekend mode. 
 

Operation

   

1.  When  the attendant sets the night mode, the 

programmed STA COS (PGM 116) will be 

applied to all the stations. 

 

Admin Programming 

n 

STA COS (PGM 116) 

 

Condition 

1.  The range of Night & Weekend STA COS is 

the same as STA COS of day mode. 

2.  In On-demand mode, the station woks with 

the same COS of Day mode. 

3.  In the Weekend mode, the station works with 

the same as STA COS of night mode. 

 

 

Temporary STA COS Change 

Description 

A station user or attendant can change the STA 

COS to COS 7 to temporarily prevent 

unauthorized dialing from the station. 
 

Operation

   

To  change the station COS temporarily from a 

station, 
1.  Press the

 [TRANS/PGM] 

button. 

2.  Dial 

2 1

. 

3.  Press the 

[HOLD/SAVE] 

button. 

 

To change the station COS  temporarily from the 

attendant, 
1.  Press the 

[TRANS/PGM] 

button at the 

attendant. 

2.  Dial 

0 2 1

. 

3.  Enter the station range. 

4.  Press the

 [HOLD/SAVE] 

button. 

 
To deactivate temporal COS change from a 

station, 

1.  Press the 

[TRANS/PGM]

 button. 

2.  Dial 

2 2

. 

3.  Enter the Authorization Code. 

4.  Press the 

[HOLD/SAVE] 

button. 

 

To deactivate temporal COS change from the 

attendant, 
1.  Press the 

[TRANS/PGM] 

button. 

2.  Dial 

0 2 2

. 

3.  Enter the station range. 
4.  Press the 

[HOLD/SAVE]

 button. 

 

To program the Authorization Code from a station, 
1.  Press the 

[TRANS/PGM]

 button. 

2.  Dial 

3 1

. 

3.  Enter the authorization code. 
4.  Press the 

[HOLD/SAVE]

 button. 

 

Admin Programming 

n 

Authorization Code (PGM 227) 

Summary of Contents for LDK24 ADSL Router





































































































Reviews:

No comments