LG LDK24 ADSL Router Programming Manual Download Page 24

Page: 24 / 100

Programming Manual for Digital Key Telephone System

LDK-

300 & LDK-100

CO Line Features

1-18

number is saved in memory until the user stores

new number. The number in the Save Number

Redial is not erased until updated to other
number.

Operation

To save a number in the Save Number Redial
buffer from a keyset,
1. Press the

[SPEED]

button twice, while

conversation with external party.

2. Replace the handset and go on-hook.

To dial a number from the Save Number Redial
buffer from a keyset,
1. Lift the handset or press the

[MON]

button.

2. Press the

[SPEED]

button.

3. Dial

button.

Condition

1. When the used CO line is busy, an idle CO

line in the group is seized and the saved

number is dialed.

2. The stored save number is not deleted at

when the system power is off.

3. If you press [SPEED] button twice after

seizing a CO line with dialing and go idle

state, the save number redial bin will be

erased.

STATION SPEED DIAL

Description

Each station user can program up to 100
individual speed dial numbers in the station. The

numbers are entered and stored by the user and

can be recalled by the user at any time. These
numbers provide speedy access to often-used

outgoing CO line call dialing numbers.

There are a total of 500 speed locations to be
divided among the stations. Station speed

number can be saved up to 24 digits.

Operation

To place a call using Station Speed Dial from a
keyset,

1. Lift the handset or press the

[MON]

button.

2. Press the

[SPEED]

button.

3. Dial the station speed dial bin (000~099).

To store Station Speed Dial numbers from a
keyset,

1. Press the

[TRANS/PGM]

button.

2. Press the

[SPEED]

button.

3. Dial the station speed dial bin (000~099).

4. If desired, press the CO line or group button.

5. Dial the desired telephone number (up to 24

digits).

6. Press the

[HOLD/SAVE]

button.

7. If desired, enter the name (Max. 12 characters)

by dialing 2-digit for each character.

8. Press the

[HOLD/SAVE]

button.

*. To store continuously, repeat the above

procedure from 3.

To delete a Station Speed Dial bin,

1. Press the

[TRANS/PGM]

button.

2. Press the

[SPEED]

button.

3. Dial the speed bin number to be erased.

4. Press the

[HOLD/SAVE]

button. Then, the

stored speed number is erased in the speed
bin.

To display and enter a speed dial bin by scrolling,

1. Press the

[TRANS/PGM]

button.

2. Press the

[SPEED]

button.

3. Dial the speed bin number.

4. Press the

[UP]

[DOWN]

key to display the

next/previous speed dial number.

Admin Programming

Speed Dial Access (PGM 112-BTN 9)

CO Dial Tone Detect (PGM 160-BTN 6)

Condition

1. CPTU should be installed to detect dial tone.
2. The Station Speed Dial is secured in data

protect mode when the power is off.

3. There can be max. 24 digits in a station

speed dial number including some digits and

special function codes.

Special Function Codes

a. [CALLBK] button – Pause

b. ‘*’ – If it is stored as the first digit, its

function is Display Security. Otherwise,
its function is Pulse to DTMF Switchover.

c. [DND/FOR] button – If CO Dial Tone

Detect (PGM 160-BTN 6) is ON and it is

Summary of Contents for LDK24 ADSL Router





































































































Search results

Summary of Contents for LDK24 ADSL Router

Reviews:

LG LDK24 ADSL Router, Programming Manual, Page: 24 / 100

Search results

Summary of Contents for LDK24 ADSL Router

Reviews: