manualshive.com logo in svg

LG LDK24 ADSL Router, Programming Manual, Page: 29 / 100

Share
Download
LG LDK24 ADSL Router Programming Manual Download Page 29

Programming Manual for Digital Key Telephone System 

 

                                  LDK-

300 & LDK-100   

  

 

 

       

Intercom Features 

 

 

2-2 

 

Description 

The calendar is displayed on the large LCD of a 

digital keyset. 
 

Operation 

Press the 

[MENU]

 button in standby mode. 

Press the 

[MENU]

 button again to return to 

normal menu display. 
 
 
 

CALL FORWARD  

 

Description 

A station can forward calls with certain condition 
by activating feature codes. Station may forward 

a call to any station, station group or VMIB in the 

system. 
 

Operation 

To make call forward, 

1.  Lift the handset or press the 

[MON] 

button. 

2.  Press the 

[DND/FOR]

 button. 

3.  Dial a Call Forward type code. 

4.  Dial station, group number or VMIB number 

to receive the call. 

 

To assign {CALL FORWARD} button at a flexible 

button, 

1.  Press the 

[TRANS/PGM]

 button. 

2.  Press a flexible button. 

3.  Press the [DND/FOR] button. 

4.  Assign Call Forward Type (0~7). 
5.  Dial the destination to receive the call. 

6.  Press the 

[HOLD/SAVE] 

button. 

 
To activate Call Forward, 

1.  Press the assigned flexible button. 

2.  The LED of 

[DND/FOR]

 button is flashing 

and the function assigned to the flexible 

button is activated. 

 

Condition 

Call Forward Type 

1: Call Forward, Unconditional 

2: Call Forward, Busy 
3: Call Forward, No Answer 

4: Call Forward, Busy/No Answer 

5: Station Off-net Call Forward, Unconditional 

6: Station Off-net Call Forward, No Answer 

7: Incoming CO Off-net Call Forward (ATD only) 
0: Follow Me Call Forward 

#: Remove Call Forward 

 
 

 

CALL FORWARD-BUSY/NO ANSWER  

 

Description 

A user can direct the system to re-route call to 

other station, group or VMIB  when the user's 

station is busy and/or does not answer in a 
predefined 'No Answer' time. Incoming CO line, 

transferred CO line and ringing Intercom calls are 

forwarded. 
 

Operation 

To activate Call Forward Busy/No Answer,  

1.  Lift the handset or press the 

[MON]

 button. 

2.  Press the 

[DND/FOR]

 button. 

3.  Dial Call Forward Code; (2-busy only, 3-no 

answer only, 4-busy/no answer) 

4.  Dial station or group pilot number to receive  

the calls. 

5.  Replace the handset and go on-hook. 
 

To activate Call Forward to VMIB, 

1.  Lift the handset or press the 

[MON]

 button. 

2.  Press the 

[DND/FOR]

 button. 

3.  Dial Call Forward Code. 

4.  Dial VMIB selection code 

#

 to receive the call. 

5.  Replace the handset and go on-hook. 
 
 

To deactivate Call Forward Busy/No answer,  
1.  In idle state; 

Press the 

[DND/FOR]

 button. 

2.  In off-hook state, 

Press the 

[DND/FOR]

 button and dial 

#

. 

 

Admin Programming 

n 

Call Forward (PGM 111-BTN 2) 

n 

Call Forward No Answer Timer (PGM 181-

BTN 1) 

 

 

Summary of Contents for LDK24 ADSL Router





































































































Reviews:

No comments