manualshive.com logo in svg

LG CM2460, Service Manual

Introducing the LG CM2460 stereo system - a compact, yet powerful audio solution for your home. With its user-friendly features and convenient design, the Simple Manual provided with this product ensures hassle-free setup and operation. Download the free manual from manualshive.com and unlock the full potential of your LG CM2460 system.

Share
Download
background image

3-10

< Signal check point >

IC801

IC801

ONE POINT REPAIR GUIDE

NO OPERATION OF MD 

When no sound output in the CD function, you can not listen to music reading data from a CD disc if 
the pickup module in MD doesn’t work. This step is for checking the LASER FOCUSING ACTUATOR.

4-5. LASER FOCUSING ACTUATOR

4-5-1. Solution

Please check and replace IC800, IC801 on MAIN board.

4-5-2. How to troubleshoot (Countermeasure)

The focusing actuator makes the laser beam keep a regular interval with the surface of a CD disc.
1) Check the BUSY signal from pin21 of IC800.



 If no signal, check 3.3 V (pin63 RF) and X800.

2) Check F- & F+ from IC801 to PN800 for driving the focusing actuator.



 If no signal, check +5 V for IC801.

3) Check if the FFC cable is solidly connected between PN800 and MD.
4) Check the MD.



 If the pickup module has any trouble, it can not move the laser beam on the top or bottom side.

       Please check the function after changing another MD.

4-5-3. Service hint (Any picture/ Remark)

< Waveform of F± 

for driving FOCUSING actuator >

F+

F+

pin14 to IC801

pin14 to IC801

F-

F-

pin13 to IC801

pin13 to IC801

Summary of Contents for CM2460





























































Reviews:

No comments

Related manuals for CM2460

1byone 436NA-0006 User Manual preview
436NA-0006
Brand: 1byone Pages: 17
dB Technologies IS Series User Manual preview
IS Series
Brand: dB Technologies Pages: 43
dB Technologies VIO L210 User Manual preview
VIO L210
Brand: dB Technologies Pages: 148
DaytonAudio RS621 Assembly Instructions preview
RS621
Brand: DaytonAudio Pages: 2
DaytonAudio Contractor Series User Manual preview
Contractor Series
Brand: DaytonAudio Pages: 2
Yamaha DSR112 Manuale Di Istruzioni preview
DSR112
Brand: Yamaha Pages: 17
Audio Pole POLE 533 User Manual preview
POLE 533
Brand: Audio Pole Pages: 4
iSP Technologies VMAX 12 Owner'S Manual preview
VMAX 12
Brand: iSP Technologies Pages: 10
Smoke hollow ES3018M Owner'S Manual preview
ES3018M
Brand: Smoke hollow Pages: 20
Valcom V-9022 Technical Specifications preview
V-9022
Brand: Valcom Pages: 2
Jensen SMPS-665 User Manual preview
SMPS-665
Brand: Jensen Pages: 10
ready2music riot box Instruction Manual preview
riot box
Brand: ready2music Pages: 17
balcom TLT 06 Operating Instructions Manual preview
TLT 06
Brand: balcom Pages: 4
QFX PBX-BF120 User Manual preview
PBX-BF120
Brand: QFX Pages: 4
JBL T696 Limited Owner'S Manual preview
T696 Limited
Brand: JBL Pages: 2
Jam Audio Clip-it Quick Start Manual preview
Clip-it
Brand: Jam Audio Pages: 2
Soundavo HPS-6-BL-V Owner'S Manual preview
HPS-6-BL-V
Brand: Soundavo Pages: 8
Bose BoseBuild SPEAKER CUBE Manual preview
BoseBuild SPEAKER CUBE
Brand: Bose Pages: 4

Brands by name

Popular brands

Load more brands