manualshive.com logo in svg

LG CM2460, Service Manual

Introducing the LG CM2460 stereo system - a compact, yet powerful audio solution for your home. With its user-friendly features and convenient design, the Simple Manual provided with this product ensures hassle-free setup and operation. Download the free manual from manualshive.com and unlock the full potential of your LG CM2460 system.

Share
Download
background image

3-9

< Signal check point >

IC801

IC801

ONE POINT REPAIR GUIDE

NO OPERATION OF MD 

When no sound output in the CD function, you can not listen to music reading data from a CD disc if 
the pickup module in MD doesn’t work. This step is for checking the LASER TRACKING ACTUATOR.

4-4. LASER TRACKING ACTUATOR

4-4-1. Solution

Please check and replace IC800, IC801 on MAIN board.

4-4-2. How to troubleshoot (Countermeasure)

The tracking actuator makes the laser beam be positioned in the center of a track on CD disc.
1) Check the TDOUT signal from pin14 of IC801.



 If no signal, check 3.3 V (pin63 RF) and X800.

2) Check TR- & TR+ from IC801 to PN800 for driving the tracking actuator.



 If no signal, check +5 V for IC801.

3) Check if the FFC cable is solidly connected between PN800 and MD.
4) Check the MD.



 If the pickup module has any trouble, it can not move the laser beam on the left or right side.

       Please check the function after changing another MD.

4-4-3. Service hint (Any picture/ Remark)

TR-

TR-

pin15 to IC801

pin15 to IC801

TR+

TR+

pin16 to IC801

pin16 to IC801

< Waveform of TR± 

for driving TRACKING actuator >

Summary of Contents for CM2460





























































Reviews:

No comments

Related manuals for CM2460

d&b audiotechnik J Series Rigging Manual preview
J Series
Brand: d&b audiotechnik Pages: 34
Panasonic SC-UA7 Owner'S Manual preview
SC-UA7
Brand: Panasonic Pages: 40
Panasonic SC-BTT880 Basic Operating Instructions Manual preview
SC-BTT880
Brand: Panasonic Pages: 84
Harman Kardon HKC Technical Manual preview
HKC
Brand: Harman Kardon Pages: 2
Harman Kardon HKB 4 Technical Manual preview
HKB 4
Brand: Harman Kardon Pages: 2
Harman Kardon LSR4326P Quick Start Manual preview
LSR4326P
Brand: Harman Kardon Pages: 2
Harman Kardon HK40 Owner'S Manual preview
HK40
Brand: Harman Kardon Pages: 2
Q-Logic QL-K2001 Installation Manual preview
QL-K2001
Brand: Q-Logic Pages: 3
NARVI Oy KOTA Installation Use And Service Manual preview
KOTA
Brand: NARVI Oy Pages: 5
Niles HD6R Specification Sheet preview
HD6R
Brand: Niles Pages: 2
Eclipse D3II Owner'S Manual preview
D3II
Brand: Eclipse Pages: 8
Electro-Voice ECS 12-2 Specifications preview
ECS 12-2
Brand: Electro-Voice Pages: 2
Bang & Olufsen BEOCENTER 2000 Service Manual preview
BEOCENTER 2000
Brand: Bang & Olufsen Pages: 26
Pro-Linear MB4.3V8S User Manual preview
MB4.3V8S
Brand: Pro-Linear Pages: 13
Zonyee ZYBS01 User Manual preview
ZYBS01
Brand: Zonyee Pages: 7
Soda Trend 06281 Manual preview
06281
Brand: Soda Trend Pages: 16
Technics SB-TA210K Operating Instructions Manual preview
SB-TA210K
Brand: Technics Pages: 6
SoundMax SM-CSC503 Instruction Manual preview
SM-CSC503
Brand: SoundMax Pages: 15

Brands by name

Popular brands

Load more brands