76
Appendix
5. Network Setting with DHCP "Off"
Set DHCP to Off: Assign an IP address
manually. Set IP Address as the IP Address
format of PC.
(1) Press SELECT, use ▲▼ to choose “DHCP
Off ” and then press SELECT again.
(2) Press the ▲▼ to select the option to adjust,
and press the SELECT button.
(3) Press the button to select the instructions to
adjust the block.
(4) Press the ▲ ▼ direction button to adjust
value.
- Select an IP address.
- Select subnet mask number.
- Select the default gateway of the network
connected to the projector.
- Select DNS number.
(5) Select SET by ▲▼ and then Press SELECT.
Then it will display "waiting…"on the screen.
Wait until it disappears.
< Note >
• If Network Setting is not working, check your network conditions. Check the LAN cable connection.
• IP Auto Setting (DHCP On ) : Select it if there is a DHCP (Dynamic Host Configuration Protocol) server
on the local area network (LAN) via wired connection, the Projector will automatically be allocated an
IP address. The IP address will automatically be determined. Connection to DHCP may not be possible
when the firewall is installed or according to the model of the computer.
• IP Manual Setting ( DHCP Off ): Select it if there is no DHCP server on the network and you want to set
the IP address manually.
• Press the menu button to exit the menu screen.
-----
Select
LAN
DHCP
Off
IP Address
Subnet Mask
Gateway
DNS
cancel
Network Setting
.
.
.
.
.
.
.
.
.
.
.
.
192 168 1 100
255 255 255 0
192 168 1 1
192 168 1 1
set