42
Video Input
Image adjust
1. Press MENU button on the remote control
to display the on-screen menu. Press ▲▼ to
select the
image adjust
icon. Then press ►
or press OK.
2. Press ▲▼ to select the item to be adjusted,
and then press Select. At the time, the
adjustment dialogue box will appear. Press
◄►to set the value.
Contrast
Press◄ to decrease the contrast and press ►to
increase it.(from 0 to 63)
Brightness
Press ◄ to decrease the brightness and press
►to increase it.(from 0 to 63)
Color
Press ◄ to decrease the color gamut and
press ►to increase it.(from 0 to 63)
Tint
Press ◄► to select the appropriate tone for the
image.(from 0 to 63)
Red(White balance)
Press◄ to make the red color lighter and press
►to make it stronger.(from 0 to 63)
Green(White balance)
Press◄ to make the green color lighter and press
►to make it stronger.(from 0 to 63)
Blue(White balance)
Press◄ to make the blue color lighter and press
►to make it stronger.(from 0 to 63)
Sharpness
Press◄ to soften the image and press ► to
sharpen it.(from 0 to 15)
Gamma
Press ◄► to adjust the grey level to achieve
better contrast and balance.(from 0 to 15)
Noise reduction
Enable this item to reduce the snow
interference and achieve more smooth and clear
image.
Progressive
The interlaced video signal can be converted into
images in a progressive manner. You can select
one from the options below:
OFF: Disabled;
L1: Projecting dynamic image;
L2: Projecting still image;
Film: This item is used for watching films. When
it is selected, This projector will restore the images
with high quality to reduce image distortion.
Image adjust menu
Image adjust icon
√Note:
- Noise reduction and Progressive can not
be selected when 480p, 576p, 720p and 1080i
signals are coming.
- NTSC and NTSC-4.43 Color standard system
support this tint menu.