48
Option
Ceiling
Rear
Terminal
Power management
Power management
This function is used to project the image from a
ceiling mounted projector.
Off ......Disable this function.
Auto ...The picuture will be top/bottom and left/
right reversed automatically.
On.......The picture will be top/bottom and left/right
reversed.
When this function is set to On, the picture will be
left/right reversed. This function is used to project
the image from rear of the screen.
The RGB IN 2/RGB OUT terminal on the back of the projector is switchable for computer input or monitor
output (See page 13). Select RGB IN 2 or RGB Out with the Point ▲▼ buttons.
RGB IN 2 ................. RGB 2 Input
RGB Out .................. RGB Output
RGB Out is the same signal as current display source of RGB IN 1 or RGBHV. If
the input source is Video, S-Video, HDMI or Component, the default output of
RGB2 output is RGB IN 1.
For reducing power consumption as well as maintaining the lamp life, the Power management function
turns off the projection lamp when the projector is not operated for a certain period.
Select one of the following options:
Ready .................. When the lamp has been fully cooled down, the POWER indicator changes to green
blinking.In this condition, the projection lamp will be turned on if the input signal is
reconnected or any button on the side control or remote control is pressed.
Shut down .......... When the lamp has been fully cooled down, the power will be turned off.
Off ....................... Power management function is off.
Timer ................... If the input signal is interrupted and no button is pressed for more than 30 seconds,
the timer display with No signal appears. It starts the countdown until the lamp is
turned off. Use the Point ▲▼ buttons to set the Timer(1~30min.)
√ Note:
Factory default is Ready: 5 Min.
Auto Power
This function enables projector auto power on with detection connection with AC power cord.
On ....................... Auto Power function is On.
Off ....................... Auto Power function is Off.
No signal
01 : 20
Time left before Lamp is off.