manualshive.com logo in svg

LG BA850, Owner'S Manual, Page: 36 / 80

Share
Download
LG BA850 Owner'S Manual Download Page 36

36

Computer input

Image select

Direct selection

Use the PICTURE button on the remote control to 

select the image mode.

Remote control

PICTURE button

Dynamic

When the image is viewed in a bright room, select 

this mode.

Standard

This is the default image mode.

Cinema

This mode limited the brightness, and more detail 

can be seen.It is suitable for seeing a film in a 

dark environment.

Blackboard(Green)

This mode can be used to project the image on 

a green board to enhance the image quality. It 

mainly functions on a green board, not black 

board.

Colorboard

This mode is suitable for projecting the image onto 

the red, blue, yellow or green wallpaper.

Press OK to select Colorboard , and then press ► 

to enter the submenu.

Press  ▲▼ to select wallpaper from Red, Blue, 

Yellow and Green.

User

This is the image mode pre-set by in the image

adjustment menu.

Image select menu

Menu selection

1.   Press MENU button on the remote control to 

      display the on screen menu. Press ▲▼ to 

      select the image mode icon. Then press ► 

     or press OK.

2.  Press ▲▼  to select the desired item, and 

     then press OK.

Summary of Contents for BA850

















































































Reviews:

No comments