45
Option
Input search
This function detects the input signal
automatically. When a signal is found, the
search will stop. Use the Point ▲▼ buttons to
select one of the following options.
Off ........... Input search will not work.
On............. Active Input Sourcing fuction. It
detects the input signal and search
stops when the signal is found.
Auto PC Adjustment
On............. Press Auto Set button on the Top
Control or remote control to enable
Auto PC Adjustment function.
Off ........... Disables Auto PC Adjustment.
Auto setup
This function enables Input search, and Auto PC
adjustment by pressing the AUTO button on the
side control or the on the remote control. Settings
for those can be altered as follows:
Keystone
This function is used to store or reset the keystone
correction when the AC power cord is unplugged.
Use the Point ▲▼ buttons to switch between
each option.
Store ...... .. Keep the keystone correction even
when the AC power cord is unplugged.
Reset ...... Release the keystone correction when
the AC power cord is unplugged.
To correct keystone distortion, press the OK
button.Keystone appears on the screen. Use the
Point ▲▼ buttons to correct keystone distortion.
Blue Back
You can use this item to set the background of
The time when no signal is detected.
You can press ▲▼ to switch over between the
items below:
ON: To enable the blue background for projection;
OFF:To disable the blue background.
√ Note:
● Only the last selected input source can be
detected.
● If the INPUT button on the side control or
the RGB 1/2 buttons, VIDEO , S-VIDEO ,
HDMI or COMPONENT buttons on the remote
control is pressed during Input search is in
progress, Input search will stop and go back to
the previous input signal.
● Phase, Total dots, Horizontal and Vertical
position of some computers cannot be fully
adjusted with the Auto PC Adjustment
function. When the image is not provided
properly with this operation, manual
adjustments are required.