LG ATNH126ELFB, Service Manual

Page: 89 / 151

Service Manual 93
MPS Variable SINGLE A
6. Electric Characteristics
Symbols:
MCA: Minimum Circuit Amperes (A)
MFA : Maximum Fuse Amperes(A)
MSC : Maximum Starting Current Amperes(A)
RLA : Rated Load Amperes(A)
OFM : Outdoor Fan Motor
kW : Fan Motor Rated Output(kW)
FLA : Full Load Amperes(A)
Note :
1. Voltage Range
Units are suitable for use on electrical system where voltage supplied to unit terminals is not below
or above listed range limits.
2. Maximum allowable voltage unbalance between phase is 2%.
3. Select wire size based on the MCA
4. MFA is used to select the circuit breaker and ground fault circuit interrupter(each leakage circuit breaker).
5. RLA is based on the following conditions.
Indoor temperature : 27 DB / 19.0 WB
Outdoor temperature : 35 DB
The relationship between the starting time
and starting current
Starting time
Starting current
RLA
MSC
Models Power Supply Compressor OFM IFM
Indoor Unit Outdoor Unit Hz, Volts MCA MFA LRA RLA kW FLA kW FLA
ATNH126ELFB AUUH126B 8.0 15
24
5.7
0.026
0.51 0.018 0.35
AVNH126ELAB 7.9 15 5.7 0.51 0.018 0.23
ATNH186ELFB 12.3 15 8.9 0.7 0.022 0.43
ABNH186HLAB AUUH186B 12.8 15 33.8 8.9 0.067 0.7 0.118 0.92
AVNH186BLAB 12.1 15 8.9 0.7 0.030 0.23
ATNH246FLFB 15.4 20 11.3 0.7 0.040 0.53
ABNH246HLAB AUUH246B 15.7 20 62 11.3 0.067 0.7 0.118 0.92
AVNH246BLAB 15.1 20 11.3 0.7 0.035 0.27
ATNH306FLFB 14.4 30 9.9+9.9 1.4 0.049 0.67
ABNH306GLAB AUUH306B 15.1 30 36+36 9.9+9.9 0.067 1.4 0.211 1.34
AVNH306BLAB 14.2 30 9.9+9.9 1.4 0.043 0.38
ATNH366DLFB
AUUH368B
11.6 20
18+18
3.95+3.95
0.047x2
0.48x2 0.053 0.76
ABNH366GLAB 12.3 20 3.95+3.95 0.48x2 0.272 1.42
ATNH486DLFB
AUUH488B
17.1 20
42+42
5.65+5.65
0.070x2
0.73x2 0.059 1.50
ABNH486RLAB 19.2 20 5.65+5.65 0.73x2 0.431 3.65
ATNH606DLFB
AUUH608B
17.3 25
75
11.2
0.070x2
0.73x2 0.107 1.80
ABNH606RLAB 19.1 25 11.2 0.73x2 0.431 3.65
Voltage
range
50,
220~240
Min.
198V
Max.
246V