LG AS65GD Series, Owner'S Manual

Page: 13 / 48

13
Remote Controller
inserting Battery
1 with the backside of the remote
controller facing up, remove the battery
tray from the remote controller.
2
Insert the battery provided with the
appliance to the tray.
•
The (+) electrode of the battery must
face upward.
3
Insert the battery tray to the remote
controller.
NOTe
•
If the battery runs out of charge, replace it
with a new one (Cr2025).
•
If the remote controller does not work as
expected, try to replace the battery or
check the polarity (+, -) of the battery. If
the problem continues, contact the Service
Centre.
•
Dispose of the used battery according to
the environmental regulations.
Back
7
Insert the fi xing parts at the bottom of
the cover into the holes at the bottom
of the appliance before you close the
cover.
8
Assemble the appliance in the reverse
order of disassembly after cleaning the
appliance and replacing the fi lter.
CAuTiON
•
Failure to remove the supports may affect
the performance of the appliance. Please
be sure to remove it before use.
•
Make sure that you remove the fi lter’s
vinyl prior to use otherwise it may result in
appliance malfunction.
•
Pay attention to the direction of the fi lter
when you install the fi lter otherwise it
may cause malfunction or failure of the
appliance.