background image

09

 •Do not climb or place objects on top of the appliance.
 •Do not operate the appliance with wet hands.
 •Do not let the moisture from the humidifier directly touch the 

appliance.

 •Do not use the appliance while it is not in upright position.
 •Do not use the appliance near objects vulnerable to heat. 
 •Use the filter only for its intended purpose.
 •The Deodorizing Care Filter and Allergen Collection Care 

Filter are assembled together. Do not try to detach them from 

each other.

 •Do not use detergents, cosmetics, chemicals, air fresheners, 

or disinfectants in the appliance.

 •Do not place magnetic or metal objects on top of the 

appliance.

 •Do not touch any internal parts while the unit is operating or 

immediately after operation.

 •Do not operate the Booster arbitrarily.
 •Do not insert any objects into the Booster.
 •Do not operate the product while the Booster cover and grill 

are separated.

 •Do not insert hands or metal objects into the moving part of 

the Clean Booster.

 •Do not press multiple buttons at the same time on the remote 

controller.

 •Do not kick or step on the remote controller.
 •Do not use the remote controller where there is too much 

water or moisture.

 •Do not use the remote controller where there is fire or heat.

Summary of Contents for AS65GD Series

















































Reviews: