background image

28

NOTe

 

The overall air quality level is a result of 

both PM concentration and the odour 

level. It may differ from the PM10, PM2.5 

and PM1.0 concentration levels.

 

even two products placed in the same 

space could measure the concentration of 

particles differently due to air circulation.

 

The chemicals contained in air fresheners, 

perfumes, deodorizers or cosmetics may 

affect the overall air quality display.

 

The particles concentration displayed may 

change with environmental factors such 

as the presence of sofas, beds, carpets, 

vacuum cleaners, humidity, smoke, bugs, 

pets or cooking oils.

 

The PM concentration may be affected by 

changes in the outside environment such 

as construction, heavy traffic or pollen.

The micro particles concentration could be 

higher near outside doors, windows, vents 

or in areas where outside air enters.

 

use OnlY water to clean the sensor. 

using anything else could cause appliance 

failure.

 

The concentration of particles could be 

affected by cooking or using humidifiers, 

sprays or other products which generate 

steam or fine particles.

using the Air ionizer

To generate ions to minimize various bacteria 

from the air.
Press the 

Booster Speed

 button for more 

than 3 seconds while operating.

 

 (Air ionizer) is displayed on the status 

display.

NOTe

 

when the operation is stopped, the air 

ionizer function can not be used.

 

The air ionizer function is available in all 

operating modes.

Summary of Contents for AS65GD Series

















































Reviews: