38
Cleaning the Dust Sensor
PM 1.0 (super ultra-fine dust) sensor
detects the fine dust as well as coarse
dust. Therefore, you need to clean its lens
regularly.
1
Remove the rear cover from the
product.
• For more information on how to
remove and mount the cover,
please see
Removing Packing
Materials
.
2
Open the sensor cover.
3
Clean the lens with the cotton swab
soaked with water and clean it again
with a dry cotton swab.
4
Close the sensor cover.
Note
Do not wipe the sensor with material other
than water. It may cause a product failure.
Storage
If the product is not used for a long period of
time, store it at a shaded and dry place.
1
Operate the product in
Normal
mode
for one hour or more on a fine day.
• This removes the moisture and
prevents molds from building up
inside the product.
2
Turn off the power and unplug it from
the electrical outlet.
• Wind the power cord around the
bottom of the product.
Note
The shape of the power plug differs
depending on the country.
Montblanc_D_Air_Cleaner_18PY_UG_INDIA_ENG.indd 38
2018. 3. 21. 오후 7:41
Summary of Contents for AS60GD Series
